Trowel Grade Epoxy in Laguna, CA

If Strength is a Demand

Trowel grade epoxy is the maximum concrete coat for thickness and longevity! For heavy-duty workshops, manufacturing locations, chemical plants, and factories, trowel grade epoxies are perfect. They stand additional mass, corrosives, and traffic. If your concrete endures much punishment, it needs a trowel grade epoxy coating.

One point about trowel grade epoxy is that because it is thicker, curing time is often needed. There are also ideal conditions for applying trowel grade floors. Above seventy degrees Fahrenheit, the epoxy should solidify in eight to twelve hours’ time and the protective clear coat that goes on top will solidify in the same space of time. At that time, it is OK to walk on the epoxy floor, but the final cure takes 7 days. Below 70 degrees Fahrenheit, it takes additional time for sufficient curing and if the temperature drops below 55 degrees Fahrenheit, the thickness of a trowel grade epoxy floor really should not be attempted. So, this is definitely a late spring, summer, or early autumn job.

Trowel grade necessitates significant skill and experience to apply properly. California Custom Coatings has the crew and equipment essential to match the specifications of any industrial or commercial building. For added information about the application of trowel grade floor coats in Laguna, contact us online or by ringing 916-612-2399.
Request a Free Quote